• Trusted Name In Oil Lubricants!
  • +91 7757009623

Products

Rust Preventive Oil

Rust preventive oils are used for intermediate storage of dry work pieces during and after production. Besides a rapid application speed and a reliable corrosion protection they offer further advantages:

Categories

Solvent Based (DW Rust Preventives)

Solvent-based rust preventives form thin rust preventive films with the consistency depending on the inhibitor type. Due to the evaporating solvent the film normally appears much drier than with rust preventive oils. The evaporation speed correlates with the solvent flash point. Further

Advantages are:
  • Reliable rust prevention
  • fast drying
  • Easily removed
Neat cutting oils
  • Rusto shield 902 DW

    Rusto Shield 902DW is soft film, water displace, solvent deposited type of the rust preventive fluid. This type of fluid easily applies to the water moist metal surface where they displace water and form uniform anti-corrosive protective barrier on the surface of component. Easily spread over the surface of component with instant drying effect. The anti-corrosive film easily removed by wiping cotton waste in kerosene or wash with alkaline cleaner and detergents

Viscosity in c.st @ 40°C Flash Point Rust Protection
2 ± 0.05 > 40°C 9 Months - Indoor
Neat cutting oils
  • Rusto shield 904 DW

    Rusto Shield 904 DW is soft film, water displace, solvent deposited type of the rust preventive fluid. This type of fluid easily applies to the water moist metal surface where they displace water and form uniform anti-corrosive protective barrier on the surface of component. Easily spread over the surface of component with instant drying effect. The anti-corrosive film easily removed by wiping cotton waste in kerosene or wash with alkaline cleaner and detergents.

Viscosity in c.st @ 40°C Flash Point Salt Spray Rust Protection
2.5 ± 0.5 160 > 150°C 2 Months - Indoor
1 Months - Outdoor
Neat cutting oils
  • Rusto shield 25 DW

    Rusto Shield 25 DW is a powerful solvent deposited corrosion preventive with good dewatering properties. The product, following evaporation of the solvent leaves a soft greasy protective film. This is a medium to long term protective for use in severe conditions where a high degree of protection is required. It is ideal for protection of machined components prior to storage or transportation. The product also shows good water displacing properties. Although Rusto Shield 25 DW can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

Viscosity in c.st @ 40°C Flash Point Salt Spray Rust Protection
1.97 ± 0.03 > 38°C > 120 hrs 18 Months - Indoor
9 Months - Outdoor
Neat cutting oils
  • Rusto shield AFR

    Rusto Shield AFR is a hydrocarbon solvent based Rust Preventive oil, with organic, heavy metals free, acid/ alkali resistant additive package. The product leaves an adherent soft oily film, protecting metal from the environment. This Low viscosity, solvent based rust preventives have been extensively employed in the steel industry, since these are very effective, easy to apply by brush, swab or spray and also removable completely by aqueous cleaners. Various grades of solvent based fluids are used to meet the varied requirements of atmospheric conditions of storage e.g., humidity, temperature, acidic, or alkaline environments. They can take care of surface imperfections and the effects of subsequent packaging materials used if any.

Viscosity in c.st @ 40°C Flash Point Salt Spray AFR
1.97 ± 0.03 > 38°C > 75 hrs 48 hrs

Oil Based (Rust Preventives)

Almost every industry is affected by metal corrosion, but the problem much more pronounced in the industrial manufacturing sector. If not managed properly, this can lead to assembly line shutdowns, massive re-work and may even jeopardize a products’ ability to meet essential standard approval criteria.

Metal corrosion can considerably increase labour costs due to customer service complaints, multiple meetings to identify and resolve problems, inspections, and re-working materials to remove rust. Defective goods are also subject to additional shipping costs the manufacturer must cover, as well as the cost of producing a new product. However, in most situations, rust corrosion can be effectively managed or slowed down, or completely stopped by using the proper techniques.

Neat cutting oils
  • Rusto shield – 02 DW

    Rusto Shield – 02 is made from highly refined petroleum low viscosity base fluids. The specially designed and formulated additives along with specially selected dewatering compounds helps in good drying rate. The low viscosity of the oil helps in faster coverage of the object and also displaces any water left on the surface.

Viscosity in c.st @ 40°C Flash Point Salt Spray Rust Protection
7.5 ± 3 > 150°C 2-3 Months
Neat cutting oils
  • Rusto shield – 274

    Rusto shield – 274 is a mineral oil based, non-drying type powerful rust preventive oil for indoor as well as outdoor standing of ferrous articles. It can provide rust protection for at least 3-4 months for indoor storage and 2-3 months for outdoor storage of the components. It is easily applied by dipping or by brush.

Viscosity in c.st @ 40°C Flash Point Salt Spray Rust Protection
11 ± 3 160 > 150°C 2-3 Months

Tapping Oil

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad mincommodo commodoim veniam, quis nostrud exercitation ullamaliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ..

Neat cutting oils
  • METALFIN-LV

    Metalfin-LV is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-40

    Metalfin-40 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-40

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-70

    Metalfin-70 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Hobbibg & broaching Oil

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad mincommodo commodoim veniam, quis nostrud exercitation ullamaliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ..

Neat cutting oils
  • METALFIN-LV

    Metalfin-LV is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-40

    Metalfin-40 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-40

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-70

    Metalfin-70 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Gun Drilling Oil

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad mincommodo commodoim veniam, quis nostrud exercitation ullamaliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ..

Neat cutting oils
  • METALFIN-LV

    Metalfin-LV is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-40

    Metalfin-40 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-40

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-70

    Metalfin-70 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Mist Oil

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad mincommodo commodoim veniam, quis nostrud exercitation ullamaliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ..

Neat cutting oils
  • METALFIN-LV

    Metalfin-LV is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-40

    Metalfin-40 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-40

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

Neat cutting oils
  • METALFIN-70

    Metalfin-70 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.

  • METALFIN-70

    Excellent flushing properties helps to keep thepaper strip clean all the time, providing super finished jobs with greater consistency. It providesexcellent lubrication to tool and slides.